Design Request Form

Please note: Due to a record breaking influx of projects, our turn around times may be delayed slightly. Thanks for your continued support!

Before You Submit A Design

Pro Tips

  • If you have not worked with us before please fill out this section completely. If you have worked with us previously, disregard the License Number and Address.
  • Owner builders: Please write your name in contractor name and leave leave the rest of the forms blank
  • Our system only allows for 5 attachments. If you wish to send more attachments please email them to douglas@avilasolar.com

CONTRACTOR INFORMATION

Please provide your name so we may know who sent in the job.
As appears on CSLP

CUSTOMER (PROPERTY OWNER)​ INFORMATION

ELECTRICAL EQUIPMENT

If you are doing a service upgrade, Please select the buss & main breaker properties of the NEW service panel. If an upgrade is being done, the centerfeed box should always be marked NO. If you are not sure if the panel needs to be upgraded, please attached pictures of the main breaker, breakers, and label of the existing panel. Please be aware that additional permits may be required by the building department.
If YES, please provide the properties of the NEW service panel below. Please be aware that additional permits may be required by the building department.
If YES, please use the section below to select the properties of the NEW panel configuration. Also, Please use the OTHER section and tell us what is EXISTING. Please note, Electrical Load Calculations may be required by the building department.
Click or drag files to this area to upload. You can upload up to 10 files.
Max 10 Files. Max 2 MB Per File
This is NOT the utility meter.
Example: Southside of House, West end of South wall.
Example: Southside of House, West end of South wall.
If Panel is being upgraded, please detail us what the Existing Equipment is.

PHOTOVOLTAIC EQUIPMENT

Please include the FULL model number that is found on the product tech brief. I.E., Canadian Solar
Please include the FULL model number that is found on the product tech brief. I.E., CS6P-250M
Please include the FULL model number that is found on the product tech brief.

STRUCTURAL INFO

If this is left blank, we will assume they are 2x4's.
If this is left blank, we will assume they are 24" off-centered.
Unirac? IronRidge? SunModo? Everest?...
Fast Jacks? Tile Trac? Quick Mounts? S-5 Clamps?...
Click or drag files to this area to upload. You can upload up to 10 files.
If you do not upload a preferred layout or drawing showing where the main panel is located, we reserve the right to charge extra to revise the plans. If the array we design does not fit on the roof because we did not have a site check form from you, we reserve the right to charge to revise it. Please see the terms and conditions for details. Lack of planning (on your part) does not justify an emergency on our part. Max 10 Files. Max 2 MB Per File

BUNDLED SERVICES

If YES, Plans will not be sent to structural engineering until you verify the plan set is correct and tell us to send them. If NO (and the building department want them later), just let us know and we will get them ordered.
PLACARDS WILL SHIP WITHIN 24 HOURS OF YOUR APPROVAL. PACKAGE INCLUDES ALL PLACARDS/SIGNAGE SHOWN ON THE PLANS.
All projects submitted after 4PM will be reviewed the following business day. If you do not get a confirmation message pop-up after hitting submit, the form likely did not send. Please email chris@efficientsolardesign.com to verify it was received.
Scroll to Top

Contact Info

Contact Info

Contact Info

Contact Info

Contact Info

Contact Info

Contact Info

Contact Info

Contact Info